2015 Homag Brandt 1440 FC

2015 Brandt Ambition 1440 FC Edgebander

Pre-mill + corner rounding | PowerTouch

Single-sided industrial edgebander with premilling, multi-profile trimming, and two-motor corner rounding. Built for shops running PVC, ABS, and wood tape on 8–60 mm panels.

Brandt (Homag Group) KDF 440 C / Ambition 1440 FC

Capacity

• Edgebanding thickness: 0.4–8 mm (0.016"–0.31")
• Panel thickness: 8–60 mm (0.31"–2.36")
• Min. panel length: 160 mm (6.30")
• Min. panel width: 70 mm (2.76")
• Coil PVC max: 3 mm
• Feed: 8–14 m/min (27–45 FPM); 11 m/min (36 FPM) with contour trimming

Equipped with

• Motorized adjustable infeed fence (0.049 kW)
• Dual-motor joint trimming / pre-mill: (2) 2.2 kW (3 HP) @ 12,000 RPM, LH/RH rotation, pneumatic jump for chip-free edges
• Roller separating / coil feed: 3 mm × 45 mm or 1 mm × 55 mm; 0.4–8 mm strip
• Hot-melt glue unit: 6–10 kg/hr (13–22 lb/hr)
• Workpiece preheating
• Pressure zone: 1 driven + 2 idle rollers, timed pneumatic pressure, servo motor for programmable edge-thickness changeover
• Brandt PowerTouch control with 21" HD LCD touchscreen

Workstations

• Front & rear end trim: (2) 0.18 kW (1/4 HP) @ 12,000 RPM, 0°–15° automatic chamfer, pneumatic overhang on/off via PowerTouch
• Top & bottom flush / chamfer / radius trim: (2) 0.55 kW (3/4 HP) @ 12,000 RPM, 0°–25° tilt, brushless multi-axis servo, 3 positions (Profile 1 / Profile 2 / Flush)
• Multi-function trim for leading & trailing edges + vertical corner rounding: (2) 0.4 kW (1/2 HP) @ 12,000 RPM — radius or chamfer cutters, 3 mm (0.12") max edge
• Top & bottom multi-profile PVC scrape: 1 mm (0.04") & 2 mm (0.08"), or 3 mm (0.12") instead of 2 mm; servo profile change, scrape collection box, PowerTouch pneumatic disengage
• Top & bottom glue scrape: flush on panel, floating insert knives
• Top & bottom buffing: (2) 0.09 kW (0.12 HP) @ 2,750 RPM

Also included

• Motorized programmable hold-down beam (0.12 kW)
• 1.5 kW (2 HP) feed motor
• 32" diameter coil table
• Padded sound enclosure