Machine Advisors

IN-STOCK BY MACHINE ADVISORS INC. 160 TON, SOLID DRILLED PLATENS, PLATENS COVERED WITH SPRING TENSIONED FOREX BELT, PLATENS HEATED BY OIL TOP & BOTTOM, EXCLUSION OF THE RIGHT AND LEFT HAND PAIR OF CYLINDERS, EFC ELECTRONIC FLATNESS CONTROL, MAX HEAT TEMP. 120 C MAIN FEATURES * PLATEN DIMENSIONS MM. 3200X1600 (126”X 63”) * HEATED PLATENS NR. 2 * SOLID MASSIVE STEEL DRILLED PLATENS COVERED WITH MYLAR PROTECTIVE FOIL * THICKNESS OF UPPER/LOWER PLATENS MM. 37 ABT (1.45”) * OPENINGS NR. 1 * OPENING DAYLIGHT MM. 400 (15 ¾”) * CYLINDERS STROKE MM. 400 (15 ¾”) * MAX. CAPACITY TONS. 160 * UP*STROKE MOVEMENT OF THE PLATENS CONSTRUCTION * WELDED BEAMS FRAME, CALCULATED WITH HIGH STRUCTURAL SAFETY FACTOR. * THE MOVING PLATEN IS A FABRICATED WELDMENT OF HIGH THICKNESS STEEL BEAMS TO WITHSTAND THE PRESSING TONNAGE WITH MINIMAL DEFLECTION. * THE HEATING PLATENS ARE OBTAINED FROM SOLID STEEL PLATES FE 430B, SPECIALLY ROLLED, FINELY MILLED AND SMOOTHED ON THE SURFACES ON A CNC HEAVY MILLING MACHINE. * THE HEATED PLATENS WILL BE PROPERLY BORED FOR THE HEATING REQUIREMENTS. * BORING DONE BY A CONSTANT PITCH, WITH AUTOMATIC FEEDING, TO ENSURE A PERFECT SMOOTHNESS OF THE CHANNELS FOR THE EFFICIENT CIRCULATION OF THE HEATING FLUID. THIS GRANTS A PERFECT AND UNIFORM DISTRIBUTION OF THE TEMPERATURE ALL OVER THE PLATENS. * SELF*LUBRICATING GUIDES DIAGONALLY PLACED, FOR FLATNESS CONTROL * A RACK AND PINION SYSTEM ASSURES CONSTANT PARALLELISM OF THE MOVING PLATEN DURING CLOSING AND OPENING CYLINDERS * PRESS CYLINDERS MADE OF SPECIAL SEAMLESS TUBES OF THICK STEEL. * WELDING DONE BY A ROBOT MACHINE TO CONTROL ALL WELDING PARAMETERS. * CNC MACHINING ALLOWS MINIMUM TOLERANCE FOR PRECISION MOVEMENT AND LONG LIFE. * PISTONS ARE CNC GROUND, POLISHED AND CHROMED. * PRESSURE CYLINDERS NR. 8 * ROD DIAMETER OF PRESSURE CYLINDERS MM. 85 HYDRAULICS * HYDRAULIC GROUP MOTOR POWER KW. 3 * DUAL PUMP FOR HIGH FLOW*LOW PRESSURE AND LOW FLOW*HIGH PRESSURE STEPS * AUTOMATIC RE*SET OF HYDRAULIC PRESSURE OIL HEATING SYSTEM * MAXIMUM PLATEN TEMPERATURE °C 120 (°F 250) * SPECIAL PUMP, PLANT AND VALVES FOR HIGH TEMPERATURE OIL * SELF CONTAINED ELECTRIC BOILER * ELECTRIC BOILER HEATING POWER KW 27 * SAFETY TEMPERATURE SWITCHES CONTROLS * KEY ON/OFF SWITCH * LIGHT*UP PUSHBUTTON FOR EMERGENCY RESETTING (RUN) * COMPUTERIZED CONTROL OF THE PRESSING FUNCTIONS: * DIGITAL PRESSING TIMER WITH AUTOMATIC OPENING AND MANUAL OVERRIDE * DIGITAL DISPLAY AND SETTING OF WORKING TEMPERATURE * DIGITAL DISPLAY AND SETTING OF THE WORKING PRESSURE * EXCLUSION OF THE LEFT HAND PAIR OF HYDRAULIC CYLINDERS * ADJUSTABLE OPENING STROKE OF PRESS PLATEN * DIGITAL TIMER FOR THE MORNING START*UP OF THE BOILER * SELECTOR TO USE 50% OF THE BOILER POWER * SELF*DIAGNOSTIC WITH DIGITAL DISPLAY ON THE GENERAL FAULTS OF THE PRESS SAFETY * TWO MANUALLY OPERATED CYCLE PUSH BUTTONS WITH SAFETY TIMER MOUNTED ON THE CONTROL BOARD * SAFETY EMERGENCY*STOP CABLE FITTED TO THE PERIMETER OF THE PRESS * SAFETY LOCKING DEVICE FOR LOWER PLATEN. USED FOR MAINTENANCE PROCEDURES * SAFETY ENCLOSURES OF PINCH*POINTS * SAFETY LABELS TO INDICATE DANGERS AND PREVENTIONS * ELECTRIC CABINET AND OPERATOR PANEL WITH UL/CSA APPROVED COMPONENTS * SAFETY FEATURES AS *P ESRA CFEETY SFTEAANTDUARREDS SAS PER CE STANDARDS * VOLTAGE : 600V * VOLTAGE : 600V * EXCLUSION OF THE RIGHT HAND PAIR OF HYDRAULIC CYLINDERS TO PRESS SMALLER PANELS WITHOUT THE NEED TO USE FILLERS (THE POSITION OF THE REMAINING CYLINDERS MUST BE ANYWAY COVERED BY THE PANELS)

YOUR KEY TO USED INDUSTRIAL WOODWORKING EQUIPMENT!